Skip to content

toanluongnhu1709/praat

 
 

Repository files navigation

Praat: doing phonetics by computer

Welcome to Praat! Praat is a speech analysis tool used for doing phonetics by computer. Praat can analyse, synthesize, and manipulate speech, and create high-quality pictures for your publications. Praat was created by Paul Boersma and David Weenink of the Institute of Phonetics Sciences of the University of Amsterdam.

Some of Praat’s most prominent features are:

Speech analysis

Praat allows you to analyze different aspects of speech including pitch, formant, intensity, and voice quality. You have access to spectrograms (a visual representation of sound changing over time) and cochleagrams (a specific type of spectrogram more closely resembling how the inner ear receives sound).

Speech synthesis

Praat allows you to generate speech from a pitch curve and filters that you create (acoustic synthesis), or from muscle activities (articulatory synthesis).

Speech manipulation

Praat gives you the ability to modify existing speech utterances. You can alter pitch, intensity, and duration of speech.

Speech labelling

Praat allows you to custom-label your samples using the IPA (International Phonetics Alphabet), and annotate your sound segments based on the particular variables you are seeking to analyze. Multi-language text-to-speech facilities allow you to segment the sound into words and phonemes.

Grammar models

With Praat, you can try out Optimality-Theoretic and Harmonic-Grammar learning, as well as several kinds of neural-network models.

Statistical analysis

Praat allows you to perform several statistical techniques, among which multidimensional scaling, principal component analysis, and discriminant analysis.

For more information, consult the website praat.org, which has Praat tutorials in several languages.

1. Binary executables

While the Praat website contains the latest executable for all platforms that we support (or used to support), the releases on GitHub contain many older executables as well.

The meaning of the names of binary files available on GitHub is as follows (editions that currently receive updates are in bold):

1.1. Windows binaries

  • praatXXXX_win64.zip: zipped executable for 64-bit Windows ( XP and higher, or 7 and higher)
  • praatXXXX_win32.zip: zipped executable for 32-bit Windows ( XP and higher, or 7 and higher)
  • praatconXXXX_win64.zip: zipped executable for 64-bit Windows, console edition
  • praatconXXXX_win32.zip: zipped executable for 32-bit Windows, console edition
  • praatconXXXX_win32sit.exe: self-extracting StuffIt archive with executable for 32-bit Windows, console edition
  • praatXXXX_win98.zip: zipped executable for Windows 98
  • praatXXXX_win98sit.exe: self-extracting StuffIt archive with executable for Windows 98

1.2. Mac binaries

  • praatXXXX_mac.dmg: disk image with universal executable for (64-bit) Intel and Apple Silicon Macs (Cocoa)
  • praatXXXX_xcodeproj.zip: zipped Xcode project file for the universal (64-bit) edition (Cocoa)
  • praatXXXX_mac64.dmg: disk image with executable for 64-bit Intel Macs (Cocoa)
  • praatXXXX_xcodeproj64.zip: zipped Xcode project file for the 64-bit edition (Cocoa)
  • praatXXXX_mac32.dmg: disk image with executable for 32-bit Intel Macs (Carbon)
  • praatXXXX_xcodeproj32.zip: zipped Xcode project file for the 32-bit edition (Carbon)
  • praatXXXX_macU.dmg: disk image with universal executable for (32-bit) PPC and Intel Macs (Carbon)
  • praatXXXX_macU.sit: StuffIt archive with universal executable for (32-bit) PPC and Intel Macs (Carbon)
  • praatXXXX_macU.zip: zipped universal executable for (32-bit) PPC and Intel Macs (Carbon)
  • praatXXXX_macX.zip: zipped executable for MacOS X (PPC)
  • praatXXXX_mac9.sit: StuffIt archive with executable for MacOS 9
  • praatXXXX_mac9.zip: zipped executable for MacOS 9
  • praatXXXX_mac7.sit: StuffIt archive with executable for MacOS 7

1.3. Unix binaries

  • praatXXXX_rpi_armv7.tar.gz: gzipped tarred executable for 32-bit Linux on the Raspberry Pi 4B (GTK 2 or 3)
  • praatXXXX_chrome64.tar.gz: gzipped tarred executable for 64-bit Linux on Chromebooks (GTK 2 or 3)
  • praatXXXX_linux64barren.tar.gz: gzipped tarred executable for 64-bit Linux, without GUI or graphics
  • praatXXXX_linux64nogui.tar.gz: gzipped tarred executable for 64-bit Linux, without GUI but with graphics (Cairo and Pango)
  • praatXXXX_linux64.tar.gz: gzipped tarred executable for 64-bit Linux (GTK 2 or 3)
  • praatXXXX_linux32.tar.gz: gzipped tarred executable for 32-bit Linux (GTK 2)
  • praatXXXX_linux_motif64.tar.gz: gzipped tarred executable for 64-bit Linux (Motif)
  • praatXXXX_linux_motif32.tar.gz: gzipped tarred executable for 32-bit Linux (Motif)
  • praatXXXX_solaris.tar.gz: gzipped tarred executable for Solaris

2. Compiling the source code

You need the Praat source code only in the following cases:

  1. you want to extend Praat’s functionality by adding C or C++ code to it; or
  2. you want to understand or reuse Praat’s source code; or
  3. you want to compile Praat for a computer for which we do not provide binary executables, e.g. Linux for some non-Intel computers, FreeBSD, HP-UX, SGI, or SPARC Solaris.

Before trying to dive into Praat’s source code, you should be familiar with the working of the Praat program and with writing Praat scripts. The Praat program can be downloaded from https://praat.org.

2.1. License

All of the code is available on GitHub under the GNU General Public License. Of course, any improvements are welcomed by the authors.

2.2. Downloading the archive

To download the latest source code of Praat from GitHub, click on the zip or tar.gz archive at the latest release, or fork ("clone") the praat/praat repository at any later change.

2.3. Steps to take if you want to extend Praat

First make sure that the source code can be compiled as is. Then add your own buttons by editing main/main_Praat.cpp or fon/praat_Fon.cpp. Consult the manual page on Programming.

2.4. The programming language

Most of the source code is written in C++, but some parts are written in C. The code requires that your compiler supports C99 and C++17.

3. Compiling the source code on one platform

3.1. Compiling for Windows

To compile Praat's Windows edition on a 64-bit Windows computer, install Cygwin on that computer, and under Cygwin install the Devel packages mingw64-x86_64-gcc-g++ (for 64-bit targets) and/or mingw64-i686-gcc-g++ (for 32-bit targets). Move the Praat sources directory somewhere in your /home/yourname tree, e.g. as /home/yourname/praats and/or /home/yourname/praats32; the folders fon and sys should be visible within these folders. If you want to build Praat's 64-bit edition, type

cd ~/praats
cp makefiles/makefile.defs.mingw64 ./makefile.defs

or if you want to build Praat's 32-bit edition, type

cd ~/praats32
cp makefiles/makefile.defs.mingw32 ./makefile.defs

Then type make to build Praat.exe (use make -j12 to speed this up, i.e. to use 12 processors in parallel).

3.2. Compiling for Macintosh

Extract the praatXXXX_xcodeproj.zip file from the latest release into the directory that contains sys, fon, dwtools and so on. Then open the project praat.xcodeproj in Xcode 13.4 and choose Build or Run for the target praat_mac. You can compile with the 12.0 (i.e. the newest and standard) SDK, which will work as far back as macOS 10.9, which is our deployment target.

If you get an error message like “Code Signing Identity xxx does not match any valid, non-expired, code-signing certificate in your keychain”, then select the target praat_mac, go to Info → Build, and switch “Code Signing Identity” to “Don’t Code Sign”, or sign with your own certificate if you have one as a registered Apple developer.

If you get lots of errors saying “Expected unqualified-id” or “Unknown type name NSString”, then you may have to switch the Type of some .cpp file from “C++ Source” to “Objective-C++ Source” (under “Identity and Type” in the righthand sidebar).

If you want to build Praat as a library instead of as an executable, try the target praat_mac_a (static) or praat_mac_so (dynamic).

Notarization. If you want others to be able to use your Mac app, you will probably have to not only sign the executable, but also notarize it. To this end, do Xcode (version 13) -> Product -> Archive -> Distribute App -> Developer ID -> Upload -> Automatically manage signing -> Upload -> ...wait... (“Package Approved”) ...wait... (“Ready to distribute”) -> Export Notarized App). If your Praat.app was built into ~/builds/mac_products/Configuration64, then you can save the notarized Praat.app in ~/builds/mac_products, then drag it in the Finder to ~/builds/mac_products/Configuration64, overwriting the non-notarized Praat.app that was already there. If on the way you receive an error “App Store Connect Operation Error -- You must first sign the relevant contracts online”, you have to log in to developer.apple.com and do Review Agreement -> Agree; you may then also have to go to App Store Connect, log in, then Agreements, Tax, and Banking -> View and Agree to Terms (even if you have no paid apps).

3.3. Compiling on Linux and other Unixes

To set up the required system libraries, install some graphics and sound packages:

sudo apt-get install libgtk-3-dev
sudo apt-get install libasound2-dev
sudo apt-get install libpulse-dev
sudo apt-get install libjack-dev

To set up your source tree for Linux, go to Praat's sources directory (where the folders fon and sys are) and type one of the four following commands:

# on Ubuntu command line
cp makefiles/makefile.defs.linux.pulse ./makefile.defs

# on Chromebook command line
cp makefiles/makefile.defs.chrome64 ./makefile.defs

# on Raspberry Pi command line
cp makefiles/makefile.defs.linux.rpi ./makefile.defs

# On FreeBSD command line
cp makefiles/makefile.defs.freebsd.alsa ./makefile.defs

To build the Praat executable, type make or make -j12. If your Unix isn’t Linux, you may have to edit the library names in the makefile (you may need pthread, gtk-3, gdk-3, atk-1.0, pangoft2-1.0, gdk_pixbuf-2.0, m, pangocairo-1.0, cairo-gobject, cairo, gio-2.0, pango-1.0, freetype, fontconfig, gobject-2.0, gmodule-2.0, gthread-2.0, rt, glib-2.0, asound, jack).

When compiling Praat on an external supercomputer or so, you will not have sound. If you do have libgtk-3-dev (and its dependencies), do

cp makefiles/makefile.defs.linux.silent ./makefile.defs

Then type make or make -j12 to build the program. If your Unix isn’t Linux, you may have to edit the library names in the makefile (you may need pthread, gtk-3, gdk-3, atk-1.0, pangoft2-1.0, gdk_pixbuf-2.0, m, pangocairo-1.0, cairo-gobject, cairo, gio-2.0, pango-1.0, freetype, fontconfig, gobject-2.0, gmodule-2.0, gthread-2.0, rt, glib-2.0).

When compiling Praat for use as a server for commands from your web pages, you may not need sound or a GUI. Do

cp makefiles/makefile.defs.linux.nogui ./makefile.defs

which creates the executable praat_nogui. If you don't need graphics (e.g. PNG files) either (i.e. you need only Praat's computation), you can create an even lighter edition:

cp makefiles/makefile.defs.linux.barren ./makefile.defs

which creates the executable praat_barren. Then type make or make -j12 to build the program. If your Unix isn’t Linux, you may have to edit the library names in the makefile.

4. Compiling the source code on all platforms simultaneously

The easiest way to develop your Praat clone on all platforms simultaneously, is to edit the source code on a Mac (with Xcode) and use Parallels Desktop for Windows and Linux building and testing. This is how Praat is currently developed. Editing takes place in Xcode, after which building Praat involves no more than typing Command-B into Xcode (or Command-R to build and run) or praat-build into a Windows or Linux terminal (or praat-run to build and run).

4.1. MacOS development set-up

Your source code folders, such as fon and sys, will reside in a folder like /Users/yourname/Praats/src, where you also put praat.xcodeproj, as described above in 3.2. On Paul’s 2018 MacBook Pro with Xcode 13.4, building Praat with Command-B or Command-R, after cleaning the build folder with Shift-Command-K, takes 380 seconds for the x86_64 part and ARM64 part together (optimization level O3).

4.2. Windows development set-up

Under Parallels Desktop 17.1 or later, install Windows 10 or Windows 11. In Windows, install Cygwin, and create a praats folder, as described above in 3.1.

There are two options for your source tree: either it resides on the MacOS disk (which you will mount from Windows anyway), or it resides on the Windows disk. Compiling Praat for Windows on the MacOS disk takes 13 minutes (optimization level O3), whereas compiling Praat on the Windows disk takes only 4 minutes and 20 seconds. So we go with installing the source tree under the Cygwin home folder, as follows.

You need to get the source from the MacOS disk, so you have to mount the MacOS disk from Cygwin. This is easy: in Parallels Desktop, choose Windows 10 or 11 -> Configure, then Options, then Sharing, then Share Mac, and set Share folders to Home folder only (if this scares you, then use Custom Folders instead). Your MacOS home folder (i.e. /Users/yourname) is now visible anywhere on Windows as the Z drive (or so), and from the Cygwin64 Terminal you can access it as /cygdrive/z.

When developing Praat for Windows, you just edit your files in Xcode; do not forget to save them (as you do e.g. by building in Xcode). Then, just as you use Command-B and Command-R in Xcode, you will be able to type praat-build (which only builds) or praat-run (which builds and runs) into your Cygwin64 Terminal. To accomplish this, add the following definitions into /home/yourname/.profile in your Cygwin home folder, so that the bash shell will automatically execute them whenever you start your Cygwin64 Terminal (you will need to have installed rsync and make):

# in Cygwin:~/.profile
PRAAT_SOURCES="/cygdrive/z/Praats/src"
PRAAT_EXCLUDES='--exclude="*.xcodeproj" --exclude="Icon*" --exclude=".*" --exclude="*kanweg*"'
alias praat-build="( cd ~/praats &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.mingw64 makefile.defs &&\
    make -j12 )"
alias praat="~/praats/Praat.exe"
alias praat-run="praat-build && praat"

This also defines praat for running Praat without first rebuilding it. The cycle from editing Praat on the Mac to running the new version on Windows therefore takes only two steps:

  1. edit and save the source code in Xcode on your Mac;
  2. type praat-run on your Windows 10 (under Parallels Desktop on your Mac).

If you also want to develop the 32-bit edition, you add to .profile:

# in Cygwin:~/.profile
alias praat32-build="( cd ~/praats32 &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.mingw32 makefile.defs &&\
    make -j12 )"
alias praat32="~/praats32/Praat.exe"
alias praat32-run="praat32-build && praat32"

4.3. Linux development set-up

Under Parallels Desktop 17 or later, install Ubuntu 18.04 or 20.04, and create a folder praats in your home folder, as described above in 3.3.

In Parallels Desktop, choose Ubuntu 18.04 or 20.04 -> Configure, then Options, then Sharing, then Share Mac, and set Share folders to Home folder only (or use Custom Folders instead). Your MacOS home folder (i.e. /Users/yourname) is now visible on the Ubuntu desktop as Home, and from the Terminal you can access it as /media/psf/Home.

When developing Praat for Linux, you just edit and save your files in Xcode. You will be able to type praat-build (which only builds) or praat-run (which builds and runs) into your Terminal after you add the following definitions into /home/parallels/.bash_aliases in your Ubuntu home folder (this will be run automatically by .bashrc whenever you start a Terminal window, assuming that it uses the bash shell):

# in Ubuntu:~/.bash_aliases
PRAAT_SOURCES="/media/psf/Home/Praats/src"
PRAAT_EXCLUDES='--exclude="*.xcodeproj" --exclude="Icon*" --exclude=".*" --exclude="*kanweg*"'
alias praat-build="( cd ~/praats &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.linux.pulse makefile.defs &&\
    make -j12 )"
alias praat="~/praats/praat"
alias praat-run="praat-build && praat"

Building Praat this way takes 2 minutes and 10 seconds (optimization level O3).

To build praat_barren, create a folder praatsb, and define

# in Ubuntu:~/.bash_aliases
alias praatb-build="( cd ~/praatsb &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.linux.barren makefile.defs &&\
    make -j12 )"
alias praatb="~/praatsb/praat_barren"
alias praatb-run="praatb-build && praatb"

You test praat_barren briefly by typing

# on Ubuntu command line
praatb --version

To build praat_nogui, create a folder praatsn, and define

# in Ubuntu:~/.bash_aliases
alias praatn-build="( cd ~/praatsn &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.linux.nogui makefile.defs &&\
    make -j12 )"
alias praatn="~/praatsn/praat_nogui"
alias praatn-run="praatn-build && praatn"

You test praat_nogui briefly by typing

# on Ubuntu command line
praatn --version

To build Praat for Chrome64 (64-bit Intel Chromebooks only), create a folder praatc, and define

# in Ubuntu:~/.bash_aliases
alias praatc-build="( cd ~/praatsc &&\
    rsync -rptvz $PRAAT_SOURCES/ $PRAAT_EXCLUDES . &&\
    cp makefiles/makefile.defs.chrome64 makefile.defs &&\
    make -j12 )"
alias praatc="~/praatsc/praat"
alias praatc-run="praatc-build && praat"

To test Praat for Chrome64, you can just run it on Ubuntu by typing praatc, or you transfer it to a Chromebook for the real test.

4.4. Chromebook development set-up

Parallels Desktop 17 has no emulator for Chrome, so the choice is between building Praat on a Chromebook directly or building Praat on Ubuntu 18.04 or 20.04. On a 2019 HP Chromebook with Intel processor, building Praat takes a forbidding 27 minutes.

So we choose to build Praat on Ubuntu (under Parallels Desktop on the Mac), because building the Intel Chrome64 edition on Ubuntu 18.04 takes only 2 minutes and 10 seconds. If you have the Linux set-up described in 4.3, you can do this with the bc command.

Next, you need a way to get the executable praat from Mac/Ubuntu to your Chromebook. The distributors of Praat do this via an intermediary university computer; let’s call this computer-in-the-middle fon.hum.uva.nl (not coincidentally, that’s the name of the computer that hosts praat.org). If you have an account on that computer (say it’s called yourname), then you can access that account with ssh, and it is best to do that without typing your password each time. To accomplish this, type

# on Ubuntu command line
ssh-keygen

on your Ubuntu. This gives you a file ~/.ssh/id_rsa.pub on your Ubuntu, which contains your public ssh key. You should append the contents of this id_rsa.pub to the file ~/.ssh/authorized_keys on your intermediary computer. From that moment on, your intermediary computer will accept rsync -e ssh calls from your Ubuntu. On the intermediary computer, create a folder ~/builds, and a folder chrome64 inside that. If you now define

# in Ubuntu:~/.bash_aliases
praatc-put="rsync -tpvz ~/praatsc/praat [email protected]:~/builds/chrome64"
praatc-mid="praatc-build && praatc-put"

you can build and send Praat for Chrome to the intermediary computer by just typing

# on Ubuntu command line
praatc-mid

On your Chromebook, start up Linux (see the Chromebook download page for details), create a directory ~/praats there, and define the following:

# in Chromebook:~/.bash_aliases
alias praat-get="( cd ~/praats &&\
    rsync -tpvz [email protected]:~/builds/chrome64/praat . )"
alias praat="~/praats/praat"
alias praat-run="praat-get && praat"

From then on, you can use

# on Chromebook command line
praat-run

to fetch Praat from the intermediary computer and run it.

The cycle from editing Praat on the Mac to running it on your Chromebook therefore takes only three steps:

  1. edit and save the source code in Xcode on your Mac;
  2. type praatc-mid on your Ubuntu (under Parallels Desktop on your Mac);
  3. type praat-run on your Chromebook.

For edits in a cpp file (no changes in header files), this whole cycle can be performed within 15 seconds.

4.5. Raspberry Pi development set-up

One could perhaps create the Raspberry Pi edition by cross-compiling on Ubuntu 18.04 or 20.04. If any reader of these lines has precise instructions, we would like to know about it (the main problem is how to install the GTK etc libraries in the Raspberry Pi toolchain, or how to get dpkg under Ubuntu-buster to actually find armhf libraries).

Till then, you build on the Raspberry Pi itself. Your could do that via an intermediary computer (analogously to what we described above for Chromebook), but you can also do it directly if you include your Raspberry Pi in the same local network as your Mac and switch on SSH on your Raspberry Pi (via Raspberry -> Preferences -> Raspberry Pi Configuration -> Interfaces -> SSH -> Enable. You add your Mac’s public SSH key to your Raspberry Pi with

# on Mac command line
ssh-keygen   # only if you have no SSH key yet
ssh-copy-id [email protected]   # or whatever your Pi’s static IP address is

On your Raspberry Pi, you create a folder ~/praats, after which you can push the sources from your Mac to your Raspberry Pi with

# in Mac:~/.bash_profile
PRAAT_SOURCES="~/Praats/src"
PRAAT_EXCLUDES='--exclude="*.xcodeproj" --exclude="Icon*" --exclude=".*" --exclude="*kanweg*"'
alias praats-putpi="rsync -rptvz -e ssh $PRAAT_EXCLUDES \
    $PRAAT_SOURCES/ [email protected]:~/praats"

On the Raspberry Pi, you define

# in RaspberryPi:~/.bash_aliases
alias praat-build="( cd ~/praats &&\
    cp makefiles/makefile.defs.linux.rpi makefile.defs &&\
    make -j4 )"
alias praat="~/praats/praat"
alias praat-run="praat-build && praat"

after which you can build and run Praat with

# on Raspberry Pi command line
praat-run

Thus, the cycle from editing Praat on the Mac to running it on your Raspberry Pi therefore takes three steps:

  1. edit and save the source code in Xcode on your Mac;
  2. type praats-putpi on your Mac;
  3. type praat-run on your Raspberry Pi, perhaps via ssh -X [email protected] in your Mac terminal.

From clean sources this takes around 19 minutes (on a Raspberry Pi 4B), but if no header files change, then it can be done in approximately 20 seconds.

4.6. Distributing Praat

If you want to distribute your version of Praat, you can do so on GitHub and/or on a website (at least, that’s how the main authors do it). Both of these venues require that you have all the executables in one place. The guide below refers to the creation of packages for all platforms for Praat version 9.9.99, although your version number will be different. The packages will be collected in the directory ~/Praats/www on the Mac.

If you follow the location mentioned in the .xcodeproj file, the Mac binary will reside in a place like ~/builds/mac_products/Configuration64.

After notarizing the Mac binary (see above under 3.2), you include the executable in a .dmg disk image, with the following commands:

# on Mac command line
PRAAT_WWW=~/Praats/www
PRAAT_VERSION=9999
cd ~/builds/mac_products/Configuration64
hdiutil create -fs HFS+ -ov -srcfolder Praat.app -volname Praat_${PRAAT_VERSION} praat_${PRAAT_VERSION}.dmg
hdiutil convert -ov -format UDZO -o ${PRAAT_WWW}/praat${PRAAT_VERSION}_mac.dmg praat_${PRAAT_VERSION}.dmg
rm praat_${PRAAT_VERSION}.dmg

You also need to distribute the .xcodeproj file, which is actually a folder, so that you have to zip it:

# on Mac command line
PRAAT_SOURCES="~/Praats/src
cd $PRAAT_SOURCES
zip -r $PRAAT_WWW/praat$(PRAAT_VERSION)_xcodeproj.zip praat.xcodeproj

The Windows executables have to be sent from your Cygwin terminal to your Mac. It is easiest to do this without a version number (so that you have to supply the number only once), so you send them to the intermediate Mac folders ~/builds/win64 and ~/builds/win32. On Cygwin you can define:

# in Cygwin:~/.profile
alias praat-dist="praat-build && rsync -t ~/praats/Praat.exe /cygdrive/z/builds/win64"
alias praat32-dist="praat32-build && rsync -t ~/praats32/Praat.exe /cygdrive/z/builds/win32"

so that you can “upload” the two executables to the Mac with

# on Cygwin command line
praat-dist
praat32-dist

The four Linux executables have to be sent from your Ubuntu terminal to your Mac, namely to the folders ~/builds/linux64 (which will contain praat, praat_barren and praat_nogui) and ~/builds/chrome64 (which will contain only praat). On Ubuntu you can define

# in Ubuntu:~/.bash_aliases
alias praat-dist="praat-build && rsync -t ~/praats/praat /media/psf/Home/builds/linux64"
alias praatb-dist="praatb-build && rsync -t ~/praatsb/praat_barren /media/psf/Home/builds/linux64"
alias praatn-dist="praatn-build && rsync -t ~/praatsn/praat_nogui /media/psf/Home/builds/linux64"
alias praatc-dist="praatc-build && rsync -t ~/praatsc/praat /media/psf/Home/builds/chrome64"

so that you can “upload” the five executables to the Mac with

# on Ubuntu command line
praat-dist
praatb-dist
praatn-dist
praatc-dist

You can fetch the Raspberry Pi edition directly from your Raspberry Pi:

# on Mac command line
rsync -tpvz [email protected]:~/praats/praat ~/builds/rpi_armv7

When the folders under ~/builds, namely win64, win32, linux64, chrome64 and rpi_armv7 all contain enough new executables (there should be 1, 1, 3, 1 and 1, respectively), you can issue the following commands to create the packages and install them in ~/Praats/www:

# on Mac command line
zip $PRAAT_WWW/praat$(PRAAT_VERSION)_win64.zip ~/builds/win64/Praat.exe
zip $PRAAT_WWW/praat$(PRAAT_VERSION)_win32.zip ~/builds/win32/Praat.exe
( cd ~/builds/linux64 &&\
  tar cvf praat$(PRAAT_VERSION)_linux64.tar praat &&\
  gzip praat$(PRAAT_VERSION)_linux64.tar &&\
  mv praat$(PRAAT_VERSION)_linux64.tar.gz $PRAAT_WWW )
( cd ~/builds/linux64 &&\
  tar cvf praat$(PRAAT_VERSION)_linux64barren.tar praat_barren &&\
  gzip praat$(PRAAT_VERSION)_linux64barren.tar &&\
  mv praat$(PRAAT_VERSION)_linux64barren.tar.gz $PRAAT_WWW )
( cd ~/builds/linux64 &&\
  tar cvf praat$(PRAAT_VERSION)_linux64nogui.tar praat_nogui &&\
  gzip praat$(PRAAT_VERSION)_linux64nogui.tar &&\
  mv praat$(PRAAT_VERSION)_linux64nogui.tar.gz $PRAAT_WWW )
( cd ~/builds/chrome64 &&\
  tar cvf praat$(PRAAT_VERSION)_chrome64.tar praat &&\
  gzip praat$(PRAAT_VERSION)_chrome64.tar &&\
  mv praat$(PRAAT_VERSION)_chrome64.tar.gz $PRAAT_WWW )
( cd ~/builds/rpi_armv7 &&\
  tar cvf praat$(PRAAT_VERSION)_rpi_armv7.tar praat &&\
  gzip praat$(PRAAT_VERSION)_rpi_armv7.tar &&\
  mv praat$(PRAAT_VERSION)_rpi_armv7.tar.gz $PRAAT_WWW )

Finally, you can update your website and/or create a new release on GitHub.

About

Praat: Doing Phonetics By Computer

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 68.5%
  • C++ 29.8%
  • HTML 1.6%
  • Other 0.1%