devicetree: Change the property names in the DTS

Change the property names in the DTS to use hyphens(-) for separation instead of underscores(_). Signed-off-by: James Roy <[email protected]>
zephyrproject-rtos · Dec 24, 2024 · f10e84c · f10e84c
1 parent 58c6f5f
commit f10e84c
Show file tree

Hide file tree

Showing 38 changed files with 97 additions and 97 deletions.
diff --git a/boards/mediatek/mt8195/mt8195_adsp.dts b/boards/mediatek/mt8195/mt8195_adsp.dts
@@ -28,9 +28,9 @@
 		cpuclk: cpuclk@10000000 {
 			compatible = "mediatek,mt8195_cpuclk";
 			reg = <0x10000000 380>;
-			cg_reg = <0x10720180>;
-			pll_ctrl_reg = <0x1000c7e0>;
-			freqs_mhz = <26 370 540 720>;
+			cg-reg = <0x10720180>;
+			pll-ctrl-reg = <0x1000c7e0>;
+			freqs-mhz = <26 370 540 720>;
 		};
 
 		core_intc: core_intc@0 {

diff --git a/boards/microchip/mec1501modular_assy6885/mec1501modular_assy6885.dts b/boards/microchip/mec1501modular_assy6885/mec1501modular_assy6885.dts
@@ -52,7 +52,7 @@
 
 &i2c_smb_0 {
 	status = "okay";
-	port_sel = <0>;
+	port-sel = <0>;
 	sda-gpios = <MCHP_GPIO_DECODE_003 0>;
 	scl-gpios = <MCHP_GPIO_DECODE_004 0>;
 	pinctrl-0 = < &i2c00_scl_gpio004 &i2c00_sda_gpio003 >;
@@ -61,7 +61,7 @@
 
 &i2c_smb_1 {
 	status = "okay";
-	port_sel = <1>;
+	port-sel = <1>;
 	sda-gpios = <MCHP_GPIO_DECODE_130 0>;
 	scl-gpios = <MCHP_GPIO_DECODE_131 0>;
 	pinctrl-0 = < &i2c01_scl_gpio131 &i2c01_sda_gpio130 >;
@@ -70,9 +70,9 @@
 
 &espi0 {
 	status = "okay";
-	io_girq = <19>;
-	vw_girqs = <24 25>;
-	pc_girq = <15>;
+	io-girq = <19>;
+	vw-girqs = <24 25>;
+	pc-girq = <15>;
 	pinctrl-0 = < &espi_reset_n_gpio061 &espi_cs_n_gpio066
 		  &espi_alert_n_gpio063 &espi_clk_gpio065
 		  &espi_io0_gpio070 &espi_io1_gpio071

diff --git a/boards/microchip/mec15xxevb_assy6853/mec15xxevb_assy6853.dts b/boards/microchip/mec15xxevb_assy6853/mec15xxevb_assy6853.dts
@@ -80,7 +80,7 @@
 
 &i2c_smb_0 {
 	status = "okay";
-	port_sel = <0>;
+	port-sel = <0>;
 	sda-gpios = <MCHP_GPIO_DECODE_003 0>;
 	scl-gpios = <MCHP_GPIO_DECODE_004 0>;
 	pinctrl-0 = < &i2c00_scl_gpio004 &i2c00_sda_gpio003 >;
@@ -89,7 +89,7 @@
 
 &i2c_smb_1 {
 	status = "okay";
-	port_sel = <1>;
+	port-sel = <1>;
 	sda-gpios = <MCHP_GPIO_DECODE_130 0>;
 	scl-gpios = <MCHP_GPIO_DECODE_131 0>;
 	pinctrl-0 = < &i2c01_scl_gpio131 &i2c01_sda_gpio130 >;
@@ -114,7 +114,7 @@
 
 &i2c_smb_2 {
 	status = "okay";
-	port_sel = <7>;
+	port-sel = <7>;
 	sda-gpios = <MCHP_GPIO_DECODE_012 0>;
 	scl-gpios = <MCHP_GPIO_DECODE_013 0>;
 	pinctrl-0 = < &i2c07_scl_gpio013 &i2c07_sda_gpio012 >;
@@ -123,9 +123,9 @@
 
 &espi0 {
 	status = "okay";
-	io_girq = <19>;
-	vw_girqs = <24 25>;
-	pc_girq = <15>;
+	io-girq = <19>;
+	vw-girqs = <24 25>;
+	pc-girq = <15>;
 	pinctrl-0 = < &espi_reset_n_gpio061 &espi_cs_n_gpio066
 		  &espi_alert_n_gpio063 &espi_clk_gpio065
 		  &espi_io0_gpio070 &espi_io1_gpio071
@@ -192,8 +192,8 @@
 
 &spi0 {
 	status = "okay";
-	port_sel = <0>;
-	chip_select = <0>;
+	port-sel = <0>;
+	chip-select = <0>;
 	lines = <1>;
 	pinctrl-0 = < &shd_cs0_n_gpio055
 		      &shd_clk_gpio056

diff --git a/boards/microchip/mec172xevb_assy6906/mec172xevb_assy6906.dts b/boards/microchip/mec172xevb_assy6906/mec172xevb_assy6906.dts
@@ -125,7 +125,7 @@
 /* I2C */
 &i2c_smb_0 {
 	status = "okay";
-	port_sel = <0>;
+	port-sel = <0>;
 
 	pinctrl-0 = < &i2c00_scl_gpio004 &i2c00_sda_gpio003 >;
 	pinctrl-names = "default";
@@ -145,7 +145,7 @@
 
 &i2c_smb_1 {
 	status = "okay";
-	port_sel = <1>;
+	port-sel = <1>;
 	pinctrl-0 = <&i2c01_scl_gpio131 &i2c01_sda_gpio130>;
 	pinctrl-names = "default";
 
@@ -180,7 +180,7 @@
 
 &i2c_smb_2 {
 	status = "okay";
-	port_sel = <7>;
+	port-sel = <7>;
 	pinctrl-0 = <&i2c07_scl_gpio013 &i2c07_sda_gpio012>;
 	pinctrl-names = "default";
 };

diff --git a/boards/microchip/mec172xmodular_assy6930/mec172xmodular_assy6930.dts b/boards/microchip/mec172xmodular_assy6930/mec172xmodular_assy6930.dts
@@ -119,7 +119,7 @@
 /* I2C */
 &i2c_smb_0 {
 	status = "okay";
-	port_sel = <0>;
+	port-sel = <0>;
 
 	pinctrl-0 = < &i2c00_scl_gpio004 &i2c00_sda_gpio003 >;
 	pinctrl-names = "default";
@@ -139,7 +139,7 @@
 
 &i2c_smb_1 {
 	status = "okay";
-	port_sel = <1>;
+	port-sel = <1>;
 	pinctrl-0 = <&i2c01_scl_gpio131 &i2c01_sda_gpio130>;
 	pinctrl-names = "default";
 };
@@ -158,7 +158,7 @@
 
 &i2c_smb_2 {
 	status = "okay";
-	port_sel = <7>;
+	port-sel = <7>;
 	pinctrl-0 = <&i2c07_scl_gpio013 &i2c07_sda_gpio012>;
 	pinctrl-names = "default";
 };

diff --git a/boards/nxp/lpcxpresso55s16/lpcxpresso55s16.dts b/boards/nxp/lpcxpresso55s16/lpcxpresso55s16.dts
@@ -26,7 +26,7 @@
 
 zephyr_udc0: &usbhs {
 	status = "okay";
-	phy_handle = <&usbphy1>;
+	phy-handle = <&usbphy1>;
 };
 
 &usbphy1 {

diff --git a/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0.dts b/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0.dts
@@ -152,7 +152,7 @@
 
 zephyr_udc0: &usbhs {
 	status = "okay";
-	phy_handle = <&usbphy1>;
+	phy-handle = <&usbphy1>;
 };
 
 &usbphy1 {

diff --git a/boards/nxp/mimxrt1060_evk/mimxrt1060_evk.dts b/boards/nxp/mimxrt1060_evk/mimxrt1060_evk.dts
@@ -185,7 +185,7 @@ arduino_i2c: &lpi2c1 {
 
 zephyr_udc0: &usb1 {
 	status = "okay";
-	phy_handle = <&usbphy1>;
+	phy-handle = <&usbphy1>;
 };
 
 &usbphy1 {

diff --git a/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm7.dts b/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm7.dts
@@ -150,7 +150,7 @@ nxp_mipi_i2c: &lpi2c5 {
 
 zephyr_udc0: &usb1 {
 	status = "okay";
-	phy_handle = <&usbphy1>;
+	phy-handle = <&usbphy1>;
 };
 
 &usbphy1 {

diff --git a/boards/nxp/mimxrt595_evk/mimxrt595_evk_mimxrt595s_cm33.dts b/boards/nxp/mimxrt595_evk/mimxrt595_evk_mimxrt595s_cm33.dts
@@ -376,8 +376,8 @@ zephyr_udc0: &usbhs {
 	};
 	pinctrl-0 = <&pinmux_usdhc>;
 	pinctrl-names = "default";
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
+	mmc-hs200-1-8v;
+	mmc-hs400-1-8v;
 };
 
 &wwdt0 {

diff --git a/boards/nxp/mimxrt685_evk/mimxrt685_evk_mimxrt685s_cm33.dts b/boards/nxp/mimxrt685_evk/mimxrt685_evk_mimxrt685s_cm33.dts
@@ -359,7 +359,7 @@ i2s1: &flexcomm3 {
 
 zephyr_udc0: &usbhs {
 	status = "okay";
-	phy_handle = <&usbphy>;
+	phy-handle = <&usbphy>;
 };
 
 &usbphy {

diff --git a/boards/renesas/rcar_h3ulcb/rcar_h3ulcb_r8a77951_a57.dts b/boards/renesas/rcar_h3ulcb/rcar_h3ulcb_r8a77951_a57.dts
@@ -98,7 +98,7 @@
 		status = "disabled";
 	};
 	bus-width = <8>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
+	mmc-hs200-1-8v;
+	mmc-hs400-1-8v;
 	non-removable;
 };
diff --git a/boards/renesas/rcar_salvator_xs/rcar_salvator_xs.dts b/boards/renesas/rcar_salvator_xs/rcar_salvator_xs.dts
@@ -50,7 +50,7 @@
 		status = "disabled";
 	};
 	bus-width = <8>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
+	mmc-hs200-1-8v;
+	mmc-hs400-1-8v;
 	non-removable;
 };
diff --git a/boards/renesas/rcar_spider_s4/rcar_spider_s4_r8a779f0_a55.dts b/boards/renesas/rcar_spider_s4/rcar_spider_s4_r8a779f0_a55.dts
@@ -45,8 +45,8 @@
 		status = "okay";
 	};
 	bus-width = <8>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
+	mmc-hs200-1-8v;
+	mmc-hs400-1-8v;
 	non-removable;
 	status = "okay";
 };
diff --git a/boards/shields/ftdi_vm800c/ftdi_vm800c.overlay b/boards/shields/ftdi_vm800c/ftdi_vm800c.overlay
@@ -19,7 +19,7 @@
 		irq-gpios = <&arduino_header 8 GPIO_ACTIVE_LOW>;
 
 		pclk = <5>;
-		pclk_pol = <1>;
+		pclk-pol = <1>;
 		cspread = <1>;
 		swizzle = <0>;
 		vsize = <272>;

diff --git a/boards/shields/ssd1306/ssd1306_128x64_spi.overlay b/boards/shields/ssd1306/ssd1306_128x64_spi.overlay
@@ -26,7 +26,7 @@
 		segment-remap;
 		com-invdir;
 		prechargep = <0x22>;
-		data_cmd-gpios = <&arduino_header 15 0>;
+		data-cmd-gpios = <&arduino_header 15 0>;
 		/* reset-gpios = <&arduino_header 14 GPIO_ACTIVE_LOW>; */
 	};
 };
diff --git a/boards/silabs/radio_boards/slwrb4321a/slwrb4321a.dts b/boards/silabs/radio_boards/slwrb4321a/slwrb4321a.dts
@@ -125,19 +125,19 @@
 
 	/* PHY management pins */
 	location-mdio        = <GECKO_LOCATION(3)>;
-	location-phy_mdc     = <GECKO_LOCATION(3) GECKO_PORT_A GECKO_PIN(6)>;
-	location-phy_mdio    = <GECKO_LOCATION(3) GECKO_PORT_A GECKO_PIN(15)>;
+	location-phy-mdc     = <GECKO_LOCATION(3) GECKO_PORT_A GECKO_PIN(6)>;
+	location-phy-mdio    = <GECKO_LOCATION(3) GECKO_PORT_A GECKO_PIN(15)>;
 
 	/* RMII interface pins */
 	location-rmii        = <GECKO_LOCATION(0)>;
-	location-rmii_refclk = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(3)>;
-	location-rmii_crs_dv = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(4)>;
-	location-rmii_txd0   = <GECKO_LOCATION(0) GECKO_PORT_E GECKO_PIN(15)>;
-	location-rmii_txd1   = <GECKO_LOCATION(0) GECKO_PORT_E GECKO_PIN(14)>;
-	location-rmii_tx_en  = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
-	location-rmii_rxd0   = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(2)>;
-	location-rmii_rxd1   = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
-	location-rmii_rx_er  = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(5)>;
+	location-rmii-refclk = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(3)>;
+	location-rmii-crs-dv = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(4)>;
+	location-rmii-txd0   = <GECKO_LOCATION(0) GECKO_PORT_E GECKO_PIN(15)>;
+	location-rmii-txd1   = <GECKO_LOCATION(0) GECKO_PORT_E GECKO_PIN(14)>;
+	location-rmii-tx-en  = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
+	location-rmii-rxd0   = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(2)>;
+	location-rmii-rxd1   = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
+	location-rmii-rx-er  = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(5)>;
 
 	status = "okay";
 };

diff --git a/boards/silabs/starter_kits/slstk3701a/slstk3701a.dts b/boards/silabs/starter_kits/slstk3701a/slstk3701a.dts
@@ -156,19 +156,19 @@
 
 	/* PHY management pins */
 	location-mdio        = <GECKO_LOCATION(1)>;
-	location-phy_mdc     = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(14)>;
-	location-phy_mdio    = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(13)>;
+	location-phy-mdc     = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(14)>;
+	location-phy-mdio    = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(13)>;
 
 	/* RMII interface pins */
 	location-rmii        = <GECKO_LOCATION(1)>;
-	location-rmii_refclk = <GECKO_LOCATION(5) GECKO_PORT_D GECKO_PIN(10)>;
-	location-rmii_crs_dv = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(11)>;
-	location-rmii_txd0   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(7)>;
-	location-rmii_txd1   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(6)>;
-	location-rmii_tx_en  = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(8)>;
-	location-rmii_rxd0   = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(9)>;
-	location-rmii_rxd1   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(9)>;
-	location-rmii_rx_er  = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(12)>;
+	location-rmii-refclk = <GECKO_LOCATION(5) GECKO_PORT_D GECKO_PIN(10)>;
+	location-rmii-crs-dv = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(11)>;
+	location-rmii-txd0   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(7)>;
+	location-rmii-txd1   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(6)>;
+	location-rmii-tx-en  = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(8)>;
+	location-rmii-rxd0   = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(9)>;
+	location-rmii-rxd1   = <GECKO_LOCATION(1) GECKO_PORT_F GECKO_PIN(9)>;
+	location-rmii-rx-er  = <GECKO_LOCATION(1) GECKO_PORT_D GECKO_PIN(12)>;
 
 	status = "okay";
 };

diff --git a/boards/snps/em_starterkit/em_starterkit_r23.dtsi b/boards/snps/em_starterkit/em_starterkit_r23.dtsi
@@ -34,9 +34,9 @@
 			compatible = "snps,creg-gpio";
 			reg = <0xf0000014 0x4>;
 			ngpios = <6>;
-			bit_per_gpio = <1>;
-			off_val = <0>;
-			on_val = <1>;
+			bit-per-gpio = <1>;
+			off-val = <0>;
+			on-val = <1>;
 
 			gpio-controller;
 			#gpio-cells = <2>;

diff --git a/dts/arc/synopsys/arc_hs4xd.dtsi b/dts/arc/synopsys/arc_hs4xd.dtsi
@@ -135,9 +135,9 @@
 			compatible = "snps,creg-gpio";
 			reg = <0xf00014b0 0x4>;
 			ngpios = <12>;
-			bit_per_gpio = <2>;
-			off_val = <0>;
-			on_val = <2>;
+			bit-per-gpio = <2>;
+			off-val = <0>;
+			on-val = <2>;
 
 			gpio-controller;
 			#gpio-cells = <2>;

diff --git a/dts/arc/synopsys/arc_hsdk.dtsi b/dts/arc/synopsys/arc_hsdk.dtsi
@@ -135,9 +135,9 @@
 			compatible = "snps,creg-gpio";
 			reg = <0xf00014b0 0x4>;
 			ngpios = <12>;
-			bit_per_gpio = <2>;
-			off_val = <0>;
-			on_val = <2>;
+			bit-per-gpio = <2>;
+			off-val = <0>;
+			on-val = <2>;
 
 			gpio-controller;
 			#gpio-cells = <2>;

diff --git a/dts/arm/microchip/mec1501hsz.dtsi b/dts/arm/microchip/mec1501hsz.dtsi
@@ -471,7 +471,7 @@
 			rxdma = <11>;
 			txdma = <10>;
 			lines = <1>;
-			chip_select = <0>;
+			chip-select = <0>;
 			dcsckon = <6>;
 			dckcsoff = <4>;
 			dldh = <6>;

diff --git a/dts/arm/nxp/nxp_rt10xx.dtsi b/dts/arm/nxp/nxp_rt10xx.dtsi
@@ -885,7 +885,7 @@
 			dma-channels = <32>;
 			dma-requests = <128>;
 			nxp,mem2mem;
-			nxp,a_on;
+			nxp,a-on;
 			reg = <0x400E8000 0x4000>,
 				<0x400EC000 0x4000>;
 			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,

diff --git a/dts/arm/nxp/nxp_rt11xx.dtsi b/dts/arm/nxp/nxp_rt11xx.dtsi
@@ -1048,7 +1048,7 @@
 			dma-channels = <32>;
 			dma-requests = <208>;
 			nxp,mem2mem;
-			nxp,a_on;
+			nxp,a-on;
 			reg = <0x40070000 0x4000>,
 				<0x40074000 0x4000>;
 			clocks = <&ccm IMX_CCM_EDMA_CLK 0x7C 0x000000C0>;

diff --git a/dts/arm/renesas/ra/ra8/ra8x1.dtsi b/dts/arm/renesas/ra/ra8/ra8x1.dtsi
@@ -97,7 +97,7 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			ngpios = <16>;
-			vbatts_pins = <2 3 4>;
+			vbatts-pins = <2 3 4>;
 			status = "disabled";
 		};
 

diff --git a/dts/arm64/intel/intel_socfpga_agilex5.dtsi b/dts/arm64/intel/intel_socfpga_agilex5.dtsi
@@ -128,7 +128,7 @@
 			<0x10B92000 0x1000>;
 		reg-names = "reg_base", "combo_phy";
 		clock-frequency = <200000000>;
-		power_delay_ms = <1000>;
+		power-delay-ms = <1000>;
 		resets = <&reset RSTMGR_SDMMC_RSTLINE>,
 			<&reset RSTMGR_SDMMCECC_RSTLINE>,
 			<&reset RSTMGR_SOFTPHY_RSTLINE>;