8 serie issues
GeoDMS version: 8.006
configuration: %RegressionTestsSourceDataDir%\prj_snapshots\RSLight2021_ontwikkel_2\Runs\PrepareData.dms
a.k.a. D:\SourceData\RegressionTests\prj_snapshots\RSLight2021_ontwikkel_2\Runs\PrepareData.dms openklappen item: MaakOntkoppeldeBronData resulted in crash daarna: /MaakOntkoppeldeBronData/Generate_Run0 openenen
openklappen item: MaakOntkoppeldeBronData results in crash
MT settings 0 & 2 enabled, 1 & 3 disabled
GeoDMS version: 8.006
Part of the unit test
GeoDMS version: 8.006
Part of the unit test, but indirect targets now cause longer calculation times and larger memory usage, compare performance of 8.008 with 8.007
GeoDMS version: 8.006
configuration: %RegressionTestsSourceDataDir%\prj_snapshots\lus_demo_2022\cfg\demo.dms a.k.a D:\SourceData\RegressionTests\prj_snapshots\lus_demo_2022\cfg\demo.dms
request item : t611_lus_demo_2022_results_test/A1_GE_Discr_calculated in Map View
Double Click on any cell to get value info
Double Click in Detail Page Value Info on value below LUClasses
Double Click Again in Detail Page Value Info on value below LUClasses
MT settings 0 & 2 enabled, 1 & 3 disabled
descr: explain value did show the source item and source row number. reproduction: xxx,
configuration: %TstDir%\Regression\cfg\stam.dms a.k.a. C:\dev\tst\Regression\cfg\stam.dms
request item: /BAG_MakeSnapshot/snapshot_20170701/vbo/src/polygon/vbo_id in table
MT settings 0 & 2 enabled, 1 & 3 disabled
FIXED in 8.011: reading fss with TiledUnit results in ReadSequence Error: stream size 1310720 conflicts with internal size 1048576
configuration: %RSLight_2021Path%\Runs\PrepareData.dms request item: /PrivData/VU/RegionalAvgCharacteristics/vrijstaand_size in table
configuration: D:\SourceData\RegressionTests\prj_snapshots\lus_demo_2022\cfg\demo.dms request item: /Simulations/A1_GE/CaseData/Compacted/SuitabilityMaps/residential in Map view and click on a cell
FIXED in 8.010: selection in table results in error: DataArrayBase Error: Index 1 out of array-range (array.size
0 ) =
configuration: D:\SourceData\RegressionTests\prj_snapshots\lus_demo_2022\cfg\demo.dms request item: /Simulations/A1_GE/CaseData/Compacted/SuitabilityMaps/residential in table view, select first cell with selection tool, scroll in table, error occurs
- branch: https://pbl.sliksvn.com/ruimtescanner/PBL/ProjDir/branches/RSLight2021_ontwikkel_3/
- revision: 8842, dd 06-07-2022
- configuration: \RSLight2021_ontwikkel_3\Runs\casus.dms na batch/RunAll.cmd
- request item: /BaseData/Verdeling_VSSH/panden_ParticuliereHuurKoop/aantal_woningen
Fout treedt op bij 8.015 maar niet bij 7.412
Note that: values unit of index arg of lookup is: "/SourceData/Vastgoed/BAG/PerJaar/Y2022/Panden/pand" and domain of value-array is "/BaseData/Verdeling_VSSH/panden_ParticuliereHuurKoop" arg1A = "/nr_ORgEntity"
configuration: %TstDir%\Regression\cfg\stam.dms a.k.a. C:\dev\tst\Regression\cfg\stam.dms request item: BAG_MakeSnapshot/snapshot_20170701/pand/Results/unique/vbo_count in tableview, look at values for id >= 10.485.760
NAD: Point_in_polygon results differ from 7 series when polygon array contains overlap and is segmented differently
Cause: a spatial index is made per segment and different segmentation may result in a different order of considering intersection. As this order is now unspecified, it is unspecified which polygon is found when a point is inside multiple polygons. Unspecified behaviour is only guaranteed to be reproducible within the same version of the GeoDms, and in casu with the same segmentation of polygons.
Possible adaptations:
- check that polygons don't overlap
- use overlay_polygon on little triangles of the points or (NYI) point_x_polygon
- (done) Polygon index is now made for all polygons, not tile-by-tile
- (NYI) new functions:
- point_in_polygons variant that delivers cross-table,
- point_in_unique_polygon that returns data failure when multiple polygons are found,
- point_in_polygon_or_null
- count_in_polygon
configuration: %TstDir%\Regression\cfg\stam.dms a.k.a. C:\dev\tst\Regression\cfg\stam.dms
request item : /brondata/bodemgebruik/Hoofdgroep in table, select column, click Group By tool, error occurs
configuration: %prj_snapshotsDir%\lus_demo_2022\cfg\demo.dms a.k.a. D:\SourceData\RegressionTests\prj_snapshots\lus_demo_2022\cfg\demo.dms
select item : Geography/rdc_base, Open Detail Pages, Properties, error is shown
configuration: %prj_snapshotsDir%\lus_demo_2022\cfg\demo.dms a.k.a. D:\SourceData\RegressionTests\prj_snapshots\lus_demo_2022\cfg\demo.dms
select item : Current_Situation/Current_landuse in MapView, no WMTS layer is presented
configuration: %TstDir%\Regression\cfg\stam.dms a.k.a. C:\dev\tst\Regression\cfg\stam.dms
request item : /BAG_MakeSnapshot/snapshot_20170701/vbo/results/unique/pand_rel in table, application crashes
configuration: %TstDir%\Operator\cfg\microtst.dms a.k.a. C:\dev\tst\operator\cfg\microtst.dms
select item : BackGroundLayer/district/hoek in Map View, edit the color for the first class. Map View and Legend are not updated. Panning does not update the colors in the map, zooming does. For the Layer control the palette need to be hided and shown to update the color
configuration: %TstDir%\Operator\cfg\microtst.dms a.k.a. C:\dev\tst\operator\cfg\microtst.dms
select item : BackGroundLayer/district/hoek in Map View, activate the edit palette option, change the #Classes to 3 and choose equal counts, error: ValidateCount (3) failed becasue this unit has count 7. After clicking OK, the Map view is updated, but the count column is empty.
configuration: %TstDir%\Operator\cfg\microtst.dms a.k.a. C:\dev\tst\operator\cfg\microtst.dms
select item : BackGroundLayer/district/hoek in TableView, select an entry with the select objects tool, table is not updated (blue color is not shown). After activating another cell, table is updated
configuration: %TstDir%\Operator\cfg\microtst.dms a.k.a. C:\dev\tst\operator\cfg\microtst.dms
select item : BackGroundLayer/district/hoek in TableView, select first one item and then select all, even after activating another cell table is not updated. After the table is requested again, application crashes.
