Solar Board Parts List

Here is a parts check list for the solar board. Here is a complete Bill of Materials including ordering links.

• Solar Power Board PCB, vB3 is the latest Beta version
• 6x Adafruit INA219 DC current/voltage sensor board (Note 7 are needed if you put a solar panel on the bottom -Z)
• 5x Solar Cells, 4V,160mA 70mm x 70mm (Note 6 are needed if you put a solar panel on the bottom -Z)
• SMA M-F Cable, 6"
• SMA 90 Degree M-F adapter
• SMA Antenna 433MHz
• SC1464-ND 3.50mm Headphone Phone Jack Stereo (3 Conductor, TRS, with two switches) for RBF switch
• 490-SP-3530A 3.5mm Male plug
• Remove Before Flight keyring tag
• 5x Schottky Diodes 1N5817 (Note 6 are needed if you put a solar panel on the bottom -Z)
• DC-DC Boost Converter Module XL6009
• Momentary pushbutton switch SPST
• CP-5-ND Barrel PowerJack for DC charger 2.1mm x 5.5mm
• 2x 9V clip hard shell connector
• JST RCY cable pairs, 22AWG wire
• 250W Halogen Work Lamp
• 1x40 pin Male breakaway headers 2.54mm
• 8x 6 pin female header 2.5mm spacing (remove one pin from one to make it a 5 pin)
• 1x40 pin Male extra long breakaway header 2.54mm 19mm length
• 1x40 pin Single row 90 degree breakaway header 2.54mm
• 2x 4.7k Ohm resistors, 1/4 Watt
• 220 Ohm resistor, 1/4 Watt
• Green LED (clear lens for maximum brightness)
• Battery powered turntable
• Mounting square, foam
• 3D printed frame

If you need a detailed parts list with ordering links, email me ku2y at amsat dot org.

Back to Solar Power Board.