Skip to content
forked from ioquake/ioq3

A port of ioquake3 + OpenArena for the Nintendo Switch. Compatible with both controllers and keyboard + mouse controls! Based off of ioquake3 1.36 and OpenArena 3.00a.

License

Notifications You must be signed in to change notification settings

faithvoid/OpenArenaNX

 
 

Repository files navigation

OpenArenaNX

A port of ioquake3 + OpenArena for the Nintendo Switch. Compatible with both controllers (including gyroscope support!) and keyboard + mouse controls! Based off of ioquake3 1.36 and OpenArena 3.00a. Also includes a q3a branch (Q3ArenaNX) for playing regular Quake III Arena.

20211009_100312

"Why? Doesn't ioquake3-nx already exist?"

It does, and this project uses some of it's code! But the releases requires a copy of baseq3 (which is non-free) to launch, so this fork tweaks a few variables to launch OpenArena (a free clone) as a standalone game. Also, this project aims to fix a few issues that build has, and eventually implement local splitscreen co-op via the Spearmint engine.

Installation

  • Copy release files to /switch/ folder
  • Copy the baseoa folder from a copy of OpenArena, making sure not to replace any files.
  • Launch via HBMenu (by pressing R, not album!)
  • Start fragging!

Bugs

  • Sleep mode causes the game and sometimes Horizon to crash. No idea what's causing this yet, any help figuring it out would be much appreciated!
  • A small amount of slowdown can happen during really hectic battles in larger maps. This happens regardless of graphical settings (although dropping the resolution via the .cfg files may help, as the in-game display menu only supports 720p and 1080p). If that doesn't help, you can potentially try slightly overclocking your Switch, but that's at your own risk, as overclocking your Switch, especially for long periods of time, may damage it.
  • If you switch between controller and keyboard + mouse input mid-match, your camera may start spinning wildly. Just press ESC/+, click with your desired input, then press ESC/+ again and it should resolve it. This might not even be a real bug and might just be my wireless keyboard, but I'm putting it here just to be safe.
  • OpenArena menu is red instead of blue. This is due to the ui.qvm file used from ioquake3-nx to enable gyro settings in the menu.

Otherwise, the game works as you'd expect, and supports most, if not all mods that don't use dynamic libraries.

Controls

Gyro controls can be enabled from the controls section of the settings menu.

  • Left Trigger - Jump
  • Right Trigger - Attack
  • Left Bumper - Crouch (or brings up keyboard when text fields are selected)
  • Right Bumper - Next Weapon
  • X - Use
  • Y - Taunt / Toggle Console (menu)
  • A - Select
  • D-Pad Left + Right - Weapon Select
  • D-Pad Up - Zoom
  • D-Pad Down - Toggle Console (in-game)
  • Minus - Scores
  • Plus - Menu
  • Left Stick In - Vote No
  • Right Stick In - Vote Yes

TODO

  • Diagnose sleep issue.
  • Implement Switch-specific menu settings in both main menu and pause screens.
  • Implement splitscreen multiplayer (probably via switching to the Spearmint engine which requires a renderer/controller code overhaul at minimum, current broken code can be found in the spearmint branch.)
  • Release a dedicated server .nro (for no practical reason other than completion + saying I did.)

Credits

  • ioquake3 team (engine)
  • OpenArena team (game assets)
  • DevKitPro team (compilation tools)
  • fgsfdsfgs (original ioquake3-nx port)
  • and many others!

Donate

Original ReadMe

Build

               ,---------------------------------------.
               |   _                     _       ____  |
               |  (_)___  __ _ _  _ __ _| |_____|__ /  |
               |  | / _ \/ _` | || / _` | / / -_)|_ \  |
               |  |_\___/\__, |\_,_\__,_|_\_\___|___/  |
               |            |_|                        |
               |                                       |
               `--------- https://ioquake3.org --------'

The intent of this project is to provide a baseline Quake 3 which may be used for further development and baseq3 fun. Some of the major features currently implemented are:

  • SDL 2 backend
  • OpenAL sound API support (multiple speaker support and better sound quality)
  • Full x86_64 support on Linux
  • VoIP support, both in-game and external support through Mumble.
  • MinGW compilation support on Windows and cross compilation support on Linux
  • AVI video capture of demos
  • Much improved console autocompletion
  • Persistent console history
  • Colorized terminal output
  • Optional Ogg Vorbis support
  • Much improved QVM tools
  • Support for various esoteric operating systems
  • cl_guid support
  • HTTP/FTP download redirection (using cURL)
  • Multiuser support on Windows systems (user specific game data is stored in "%APPDATA%\Quake3")
  • PNG support
  • Many, many bug fixes

The map editor and associated compiling tools are not included. We suggest you use a modern copy from http://icculus.org/gtkradiant/.

The original id software readme that accompanied the Q3 source release has been renamed to id-readme.txt so as to prevent confusion. Please refer to the website for updated status.

More documentation including a Player's Guide and Sysadmin Guide is on: http://wiki.ioquake3.org/

If you've got issues that you aren't sure are worth filing as bugs, or just want to chat, please visit our forums: http://discourse.ioquake.org

Thank You:

Digital Ocean

---

Discourse

---

icculus dot org

Compilation and installation

For *nix

  1. Change to the directory containing this readme.
  2. Run 'make'.

For Windows,

  1. Please refer to the excellent instructions here: http://wiki.ioquake3.org/Building_ioquake3

For Mac OS X, building a Universal Binary

  1. Install MacOSX SDK packages from XCode. For maximum compatibility, install MacOSX10.4u.sdk and MacOSX10.3.9.sdk, and MacOSX10.2.8.sdk.
  2. Change to the directory containing this README file.
  3. Run './make-macosx-ub.sh'
  4. Copy the resulting ioquake3.app in /build/release-darwin-ub to your /Applications/ioquake3 folder.

Installation, for *nix

  1. Set the COPYDIR variable in the shell to be where you installed Quake 3 to. By default it will be /usr/local/games/quake3 if you haven't set it. This is the path as used by the original Linux Q3 installer and subsequent point releases.
  2. Run 'make copyfiles'.

It is also possible to cross compile for Windows under *nix using MinGW. Your distribution may have mingw32 packages available. On debian/Ubuntu, you need to install 'mingw-w64'. Thereafter cross compiling is simply a case running 'PLATFORM=mingw32 ARCH=x86 make' in place of 'make'. ARCH may also be set to x86_64.

The following variables may be set, either on the command line or in Makefile.local:

  CFLAGS               - use this for custom CFLAGS
  V                    - set to show cc command line when building
  DEFAULT_BASEDIR      - extra path to search for baseq3 and such
  BUILD_SERVER         - build the 'ioq3ded' server binary
  BUILD_CLIENT         - build the 'ioquake3' client binary
  BUILD_BASEGAME       - build the 'baseq3' binaries
  BUILD_MISSIONPACK    - build the 'missionpack' binaries
  BUILD_GAME_SO        - build the game shared libraries
  BUILD_GAME_QVM       - build the game qvms
  BUILD_STANDALONE     - build binaries suited for stand-alone games
  SERVERBIN            - rename 'ioq3ded' server binary
  CLIENTBIN            - rename 'ioquake3' client binary
  USE_RENDERER_DLOPEN  - build and use the renderer in a library
  USE_YACC             - use yacc to update code/tools/lcc/lburg/gram.c
  BASEGAME             - rename 'baseq3'
  BASEGAME_CFLAGS      - custom CFLAGS for basegame
  MISSIONPACK          - rename 'missionpack'
  MISSIONPACK_CFLAGS   - custom CFLAGS for missionpack (default '-DMISSIONPACK')
  USE_OPENAL           - use OpenAL where available
  USE_OPENAL_DLOPEN    - link with OpenAL at runtime
  USE_CURL             - use libcurl for http/ftp download support
  USE_CURL_DLOPEN      - link with libcurl at runtime
  USE_CODEC_VORBIS     - enable Ogg Vorbis support
  USE_CODEC_OPUS       - enable Ogg Opus support
  USE_MUMBLE           - enable Mumble support
  USE_VOIP             - enable built-in VoIP support
  USE_FREETYPE         - enable FreeType support for rendering fonts
  USE_INTERNAL_LIBS    - build internal libraries instead of dynamically
                         linking against system libraries; this just sets
                         the default for USE_INTERNAL_ZLIB etc.
                         and USE_LOCAL_HEADERS
  USE_INTERNAL_ZLIB    - build and link against internal zlib
  USE_INTERNAL_JPEG    - build and link against internal JPEG library
  USE_INTERNAL_OGG     - build and link against internal ogg library
  USE_INTERNAL_OPUS    - build and link against internal opus/opusfile libraries
  USE_LOCAL_HEADERS    - use headers local to ioq3 instead of system ones
  DEBUG_CFLAGS         - C compiler flags to use for building debug version
  COPYDIR              - the target installation directory
  TEMPDIR              - specify user defined directory for temp files

The defaults for these variables differ depending on the target platform.

Console

New cvars

  cl_autoRecordDemo                 - record a new demo on each map change
  cl_aviFrameRate                   - the framerate to use when capturing video
  cl_aviMotionJpeg                  - use the mjpeg codec when capturing video
  cl_guidServerUniq                 - makes cl_guid unique for each server
  cl_cURLLib                        - filename of cURL library to load
  cl_consoleKeys                    - space delimited list of key names or
                                      characters that toggle the console
  cl_mouseAccelStyle                - Set to 1 for QuakeLive mouse acceleration
                                      behaviour, 0 for standard q3
  cl_mouseAccelOffset               - Tuning the acceleration curve, see below

  con_autochat                      - Set to 0 to disable sending console input
                                      text as chat when there is not a slash
                                      at the beginning
  con_autoclear                     - Set to 0 to disable clearing console
                                      input text when console is closed

  in_joystickUseAnalog              - Do not translate joystick axis events
                                      to keyboard commands

  j_forward                         - Joystick analogue to m_forward,
                                      for forward movement speed/direction.
  j_side                            - Joystick analogue to m_side,
                                      for side movement speed/direction.
  j_up                              - Joystick up movement speed/direction.
  j_pitch                           - Joystick analogue to m_pitch,
                                      for pitch rotation speed/direction.
  j_yaw                             - Joystick analogue to m_yaw,
                                      for yaw rotation speed/direction.
  j_forward_axis                    - Selects which joystick axis
                                      controls forward/back.
  j_side_axis                       - Selects which joystick axis
                                      controls left/right.
  j_up_axis                         - Selects which joystick axis
                                      controls up/down.
  j_pitch_axis                      - Selects which joystick axis
                                      controls pitch.
  j_yaw_axis                        - Selects which joystick axis
                                      controls yaw.

  s_useOpenAL                       - use the OpenAL sound backend if available
  s_alPrecache                      - cache OpenAL sounds before use
  s_alGain                          - the value of AL_GAIN for each source
  s_alSources                       - the total number of sources (memory) to
                                      allocate
  s_alDopplerFactor                 - the value passed to alDopplerFactor
  s_alDopplerSpeed                  - the value passed to alDopplerVelocity
  s_alMinDistance                   - the value of AL_REFERENCE_DISTANCE for
                                      each source
  s_alMaxDistance                   - the maximum distance before sounds start
                                      to become inaudible.
  s_alRolloff                       - the value of AL_ROLLOFF_FACTOR for each
                                      source
  s_alGraceDistance                 - after having passed MaxDistance, length
                                      until sounds are completely inaudible
  s_alDriver                        - which OpenAL library to use
  s_alDevice                        - which OpenAL device to use
  s_alAvailableDevices              - list of available OpenAL devices
  s_alInputDevice                   - which OpenAL input device to use
  s_alAvailableInputDevices         - list of available OpenAL input devices
  s_sdlBits                         - SDL bit resolution
  s_sdlSpeed                        - SDL sample rate
  s_sdlChannels                     - SDL number of channels
  s_sdlDevSamps                     - SDL DMA buffer size override
  s_sdlMixSamps                     - SDL mix buffer size override
  s_backend                         - read only, indicates the current sound
                                      backend
  s_muteWhenMinimized               - mute sound when minimized
  s_muteWhenUnfocused               - mute sound when window is unfocused
  sv_dlRate                         - bandwidth allotted to PK3 file downloads
                                      via UDP, in kbyte/s

  com_ansiColor                     - enable use of ANSI escape codes in the tty
  com_altivec                       - enable use of altivec on PowerPC systems
  com_standalone (read only)        - If set to 1, quake3 is running in
                                      standalone mode
  com_basegame                      - Use a different base than baseq3. If no
                                      original Quake3 or TeamArena pak files
                                      are found, this will enable running in
                                      standalone mode
  com_homepath                      - Specify name that is to be appended to the
                                      home path
  com_legacyprotocol                - Specify protocol version number for
                                      legacy Quake3 1.32c protocol, see
                                      "Network protocols" section below
                                      (startup only)
  com_maxfpsUnfocused               - Maximum frames per second when unfocused
  com_maxfpsMinimized               - Maximum frames per second when minimized
  com_busyWait                      - Will use a busy loop to wait for rendering
                                      next frame when set to non-zero value
  com_pipefile                      - Specify filename to create a named pipe
                                      through which other processes can control
                                      the server while it is running.
                                      Nonfunctional on Windows.
  com_gamename                      - Gamename sent to master server in
                                      getservers[Ext] query and infoResponse
                                      "gamename" infostring value. Also used
                                      for filtering local network games.
  com_protocol                      - Specify protocol version number for
                                      current ioquake3 protocol, see
                                      "Network protocols" section below
                                      (startup only)

  in_joystickNo                     - select which joystick to use
  in_availableJoysticks             - list of available Joysticks
  in_keyboardDebug                  - print keyboard debug info

  sv_dlURL                          - the base of the HTTP or FTP site that
                                      holds custom pk3 files for your server
  sv_banFile                        - Name of the file that is used for storing
                                      the server bans

  net_ip6                           - IPv6 address to bind to
  net_port6                         - port to bind to using the ipv6 address
  net_enabled                       - enable networking, bitmask. Add up
                                      number for option to enable it:
                                      enable ipv4 networking:    1
                                      enable ipv6 networking:    2
                                      prioritise ipv6 over ipv4: 4
                                      disable multicast support: 8
  net_mcast6addr                    - multicast address to use for scanning for
                                      ipv6 servers on the local network
  net_mcastiface                    - outgoing interface to use for scan

  r_allowResize                     - make window resizable
  r_ext_texture_filter_anisotropic  - anisotropic texture filtering
  r_zProj                           - distance of observer camera to projection
                                      plane in quake3 standard units
  r_greyscale                       - desaturate textures, useful for anaglyph,
                                      supports values in the range of 0 to 1
  r_stereoEnabled                   - enable stereo rendering for techniques
                                      like shutter glasses (untested)
  r_anaglyphMode                    - Enable rendering of anaglyph images
                                      red-cyan glasses:    1
                                      red-blue:            2
                                      red-green:           3
                                      green-magenta:       4
                                      To swap the colors for left and right eye
                                      just add 4 to the value for the wanted
                                      color combination. For red-blue and
                                      red-green you probably want to enable
                                      r_greyscale
  r_stereoSeparation                - Control eye separation. Resulting
                                      separation is r_zProj divided by this
                                      value in quake3 standard units.
                                      See also
                                      http://wiki.ioquake3.org/Stereo_Rendering
                                      for more information
  r_marksOnTriangleMeshes           - Support impact marks on md3 models, MOD
                                      developers should increase the mark
                                      triangle limits in cg_marks.c if they
                                      intend to use this.
  r_sdlDriver                       - read only, indicates the SDL driver
                                      backend being used
  r_noborder                        - Remove window decoration from window
                                      managers, like borders and titlebar.
  r_screenshotJpegQuality           - Controls quality of jpeg screenshots
                                      captured using screenshotJPEG
  r_aviMotionJpegQuality            - Controls quality of video capture when
                                      cl_aviMotionJpeg is enabled
  r_mode -2                         - This new video mode automatically uses the
                                      desktop resolution.

New commands

  video [filename]        - start video capture (use with demo command)
  stopvideo               - stop video capture
  stopmusic               - stop background music
  minimize                - Minimize the game and show desktop
  togglemenu              - causes escape key event for opening/closing menu, or
                            going to a previous menu. works in binds, even in UI

  print                   - print out the contents of a cvar
  unset                   - unset a user created cvar

  banaddr <range>         - ban an ip address range from joining a game on this
                            server, valid <range> is either playernum or CIDR
                            notation address range.
  exceptaddr <range>      - exempt an ip address range from a ban.
  bandel <range>          - delete ban (either range or ban number)
  exceptdel <range>       - delete exception (either range or exception number)
  listbans                - list all currently active bans and exceptions
  rehashbans              - reload the banlist from serverbans.dat
  flushbans               - delete all bans

  net_restart             - restart network subsystem to change latched settings
  game_restart <fs_game>  - Switch to another mod

  which <filename/path>   - print out the path on disk to a loaded item

  execq <filename>        - quiet exec command, doesn't print "execing file.cfg"

  kicknum <client number> - kick a client by number, same as clientkick command
  kickall                 - kick all clients, similar to "kick all" (but kicks
                            everyone even if someone is named "all")
  kickbots                - kick all bots, similar to "kick allbots" (but kicks
                            all bots even if someone is named "allbots")

  tell <client num> <msg> - send message to a single client (new to server)

  cvar_modified [filter]  - list modified cvars, can filter results (such as "r*"
                            for renderer cvars) like cvarlist which lists all cvars

  addbot random           - the bot name "random" now selects a random bot

README for Developers

pk3dir

ioquake3 has a useful new feature for mappers. Paths in a game directory with the extension ".pk3dir" are treated like pk3 files. This means you can keep all files specific to your map in one directory tree and easily zip this folder for distribution.

64bit mods

If you wish to compile external mods as shared libraries on a 64bit platform, and the mod source is derived from the id Q3 SDK, you will need to modify the interface code a little. Open the files ending in _syscalls.c and change every instance of int to intptr_t in the declaration of the syscall function pointer and the dllEntry function. Also find the vmMain function for each module (usually in cg_main.c g_main.c etc.) and similarly replace the return value in the prototype with intptr_t (arg0, arg1, ...stay int).

Add the following code snippet to q_shared.h:

#ifdef Q3_VM
typedef int intptr_t;
#else
#include <stdint.h>
#endif

Note if you simply wish to run mods on a 64bit platform you do not need to recompile anything since by default Q3 uses a virtual machine system.

Creating mods compatible with Q3 1.32b

If you're using this package to create mods for the last official release of Q3, it is necessary to pass the commandline option '-vq3' to your invocation of q3asm. This is because by default q3asm outputs an updated qvm format that is necessary to fix a bug involving the optimizing pass of the x86 vm JIT compiler.

Creating standalone games

Have you finished the daunting task of removing all dependencies on the Q3 game data? You probably now want to give your users the opportunity to play the game without owning a copy of Q3, which consequently means removing cd-key and authentication server checks. In addition to being a straightforward Q3 client, ioquake3 also purports to be a reliable and stable code base on which to base your game project.

However, before you start compiling your own version of ioquake3, you have to ask yourself: Have we changed or will we need to change anything of importance in the engine?

If your answer to this question is "no", it probably makes no sense to build your own binaries. Instead, you can just use the pre-built binaries on the website. Just make sure the game is called with:

+set com_basegame <yournewbase>

in any links/scripts you install for your users to start the game. The binary must not detect any original quake3 game pak files. If this condition is met, the game will set com_standalone to 1 and is then running in stand alone mode.

If you want the engine to use a different directory in your homepath than e.g. "Quake3" on Windows or ".q3a" on Linux, then set a new name at startup by adding

+set com_homepath <homedirname>

to the command line. You can also control which game name to use when talking to the master server:

+set com_gamename <gamename>

So clients requesting a server list will only receive servers that have a matching game name.

Example line:

+set com_basegame basefoo +set com_homepath .foo
+set com_gamename foo

If you really changed parts that would make vanilla ioquake3 incompatible with your mod, we have included another way to conveniently build a stand-alone binary. Just run make with the option BUILD_STANDALONE=1. Don't forget to edit the PRODUCT_NAME and subsequent #defines in qcommon/q_shared.h with information appropriate for your project.

Standalone game licensing

While a lot of work has been put into ioquake3 that you can benefit from free of charge, it does not mean that you have no obligations to fulfill. Please be aware that as soon as you start distributing your game with an engine based on our sources we expect you to fully comply with the requirements as stated in the GPL. That includes making sources and modifications you made to the ioquake3 engine as well as the game-code used to compile the .qvm files for the game logic freely available to everyone. Furthermore, note that the "QIIIA Game Source License" prohibits distribution of mods that are intended to operate on a version of Q3 not sanctioned by id software:

"with this Agreement, ID grants to you the non-exclusive and limited right
to distribute copies of the Software ... for operation only with the full
version of the software game QUAKE III ARENA"

This means that if you're creating a standalone game, you cannot use said license on any portion of the product. As the only other license this code has been released under is the GPL, this is the only option.

This does NOT mean that you cannot market this game commercially. The GPL does not prohibit commercial exploitation and all assets (e.g. textures, sounds, maps) created by yourself are your property and can be sold like every other game you find in stores.

PNG support

ioquake3 supports the use of PNG (Portable Network Graphic) images as textures. It should be noted that the use of such images in a map will result in missing placeholder textures where the map is used with the id Quake 3 client or earlier versions of ioquake3.

Recent versions of GtkRadiant and q3map2 support PNG images without modification. However GtkRadiant is not aware that PNG textures are supported by ioquake3. To change this behaviour open the file 'q3.game' in the 'games' directory of the GtkRadiant base directory with an editor and change the line:

texturetypes="tga jpg"

to

texturetypes="tga jpg png"

Restart GtkRadiant and PNG textures are now available.

Building with MinGW for pre Windows XP

IPv6 support requires a header named "wspiapi.h" to abstract away from differences in earlier versions of Windows' IPv6 stack. There is no MinGW equivalent of this header and the Microsoft version is obviously not redistributable, so in its absence we're forced to require Windows XP. However if this header is acquired separately and placed in the qcommon/ directory, this restriction is lifted.

Contributing

Please send all patches to bugzilla (https://bugzilla.icculus.org), or as a GitHub pull request and submit your patch there.

The focus for ioq3 is to develop a stable base suitable for further development and provide players with the same Quake 3 experience they've had for years.

We do have graphical improvements with the new renderer, but they are off by default. See opengl2-readme.md for more information.

Building Official Installers

We need help getting automated installers on all the platforms that ioquake3 supports. We don't necessarily care about all the installers being identical, but we have some general guidelines:

  • Please include the id patch pk3s in your installer, which are available from http://ioquake3.org/patch-data/ subject to agreement to the id EULA. Your installer shall also ask the user to agree to this EULA (which is in the /web/include directory for your convenience) and subsequently refuse to continue the installation of the patch pk3s and pak0.pk3 if they do not.

  • Please don't require pak0.pk3, since not everyone using the engine plans on playing Quake 3 Arena on it. It's fine to (optionally) assist the user in copying the file or tell them how.

  • It is fine to just install the binaries without requiring id EULA agreement, providing pak0.pk3 and the patch pk3s are not referred to or included in the installer.

  • Please include at least a libSDL2 so/dylib/dll on every platform.

  • Please include an OpenAL so/dylib/dll, since every platform should be using it by now.

  • Please be prepared to alter your installer on the whim of the maintainers.

  • Your installer will be mirrored to an "official" directory, thus making it a done deal.

Credits

Maintainers

Significant contributions from

About

A port of ioquake3 + OpenArena for the Nintendo Switch. Compatible with both controllers and keyboard + mouse controls! Based off of ioquake3 1.36 and OpenArena 3.00a.

Resources

License

Security policy

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 98.0%
  • Makefile 0.4%
  • HTML 0.3%
  • Assembly 0.3%
  • GLSL 0.3%
  • Shell 0.2%
  • Other 0.5%